(2) JBL Pro JRX225 2000 Watt Dual 15" DJ PA Speakers+Power Amplifier+Cables

Description: Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio Package: (2) JBL JRX225 Dual 15" Two-Way Passive DJ/PA Speakers With a 2.5" Low Frequency Driver and Pole Mount Socket + Rockville RPA12 5000 Watt Peak / 1400w RMS 2 Channel Power Amplifier Pro/DJ Amp + (2) Rockvile RCSS1425 25' 14 AWG 2-Conductor Speakon to Speakon Pro Speaker Cables with 100% Copper Conductors for Lower Resistance and a Black PVC Jacket for Both Durability and Flexibility --> Click Thumbnails to Enlarge Condition and Warranty Condition: BRAND NEW IN ORIGINAL PACKAGING Warranty: 2 YEAR MANUFACTURER Product Description Package Includes: (2) JBL Pro JRX225 2,000 Watt Dual 15" Inch 2-Way DJ P/A Passive Speakers (1) Rockville RPA12 5000 Watt Peak / 1400w RMS 2 Channel Power Amplifier Pro/DJ Amp (2) Rockvile RCSS1425 25' 14 AWG Speakon to Speakon Speaker Cables 100% Copper Features of JRX225: JBL JRX225 Dual 15" 2000 Watt Passive DJ/PA Speaker Dual JBL low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil for greater efficiency and power handling. JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver Advanced network topology crossover design High-voltage capacitors and inductors with massive cores and heavy gauge wire Progressive Transition™ high frequency waveguide 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure SonicGuard™ protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10° Details: Power Rating : 500 W / 2000 W Frequency Range (-10 dB) : 42 Hz - 18 kHz Frequency Response (±3 dB) : 62 Hz - 13 kHz Sensitivity (1w/1m) : 100 dB SPL Nominal Impedance : 4 ohms Recommended Amplifier Power : 500 W to 1000 W into 4 ohms Maximum SPL : 133 dB Nominal Dispersion : 90º x 50º Crossover Frequency : 2.2 kHz Dimensions (H x W x D) : 1092 mm x 464 mm x 432 mm (43 in x 18.3 in x 17 in) Weight : 42.6 kg (94 lb) High Frequency Driver : JBL 2414H-C , 1" exit compression driver mounted on Progressive Transition™ Waveguide Low Frequency Driver : JBL M115-8A x 2 Input Connectors : Neutrik® Speakon® NL-4 (x1); .25 in TS phone jack (x1); parallel Grille : 18-gauge, powder-coated steel How to Set Up Your RPA12, RPA14, and RPA16: Video of RPA12: Power Ratings: RMS Power Output:Stereo 8 Ohm: 2 x 500WStereo 4 Ohm: 2 x 700WBridged 8 Ohm: 1 x 1400WPeak Power Output:Stereo 8 Ohm: 2 x 2000W MaxStereo 4 Ohm: 2 x 2500W MaxBridged 8 Ohm: 1 x 5000W MaxTerminals:Input Terminals:Combo jack (XLR and ¼”) A & B inputsOutput Terminals:Banana binding post speaker outputSpeakon outputXLR output to connect another amplifier or powered subFeatures:Rockville RPA12 5000 Watt Peak 2 Channel Professional/DJ Rack Mount AmplifierLCD displays volume in dB per channel and operating temperature2U rack spaceBuilt in limiter protects your speakers from distortion and clippingBridged mode allows you to combine both channels power into one channel for use with a subwooferStereo mode is perfect for (2) speakers or (4) speakers in a left and right configurationParallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configurationBuilt in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s)Channel A & B Clipping Led IndicatorsChannel A & B Separate Level ControlsPower, signal, clipping, and protection LED indicators on front of ampHeavy duty rack mount ears with handlesBuilt-in variable high velocity quiet cooling fansMaximum headroom for 4-ohm and 8-ohm SpeakersLevel controls for precise setting and matching of sensitivityComputer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over loadUser serviceable fuse (15A, 250V)Frequency Response (bandwidth @ 2Vrms out, @ -3.0dB) 10 Hz – 30 KhzTHD + Noise @ 1Khz full power: <0.03%Input Impedance: 10K Ohm BalancedInput signal voltage: 660mV – 1.5VInput sensitivity: 0.7vDamping factor: ( 100Hz, 10w, 4 ohms): 40.8Damping factor: (1Khz @ 8 ohm): >400:1Effective damping factor (100Hz, 10w, 4 Ohms) 1.08Output impedance at speaker terminals: 0.09803 OhmsFrequency Response vs THD+N (worst case, across normal bandwidth 1W) 0.11%Signal to Noise Ratio: > 100dBIMD 60Hz & 1kHz, 4:1: <0.04%SLEW RATE (input filter limited) : 40v/uSPower Requirements: 120V / 50-60HzWeight: 26.5 lbsDimensions: 19.09 x 16.93 x 3.35 inch Authorized Rockville Dealer Video of RCSS1425: Description: All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer. The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use. Features: Rockville RCSS14-25 14 AWG 2-Conductor SpeakON to SpeakON Pro Speaker Cable 100% Copper Conductors for Lower Resistance Black PVC Jacket for Both Durability and Flexibility Intended for High-Current Applications Only, Not Line-Level Signals Length: 25 Ft Gauge: 14 Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 2 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: (2) JRX225+RPA12+(2) RCSS1425 Home / About Us / Contact Us / Returns / FAQ's Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design

Price: 1335.75 USD

Location: Inwood, New York

End Time: 2024-08-22T17:58:42.000Z

Shipping Cost: 0 USD