Gorilla Waterproof Caulk & Seal 100% Silicone Sealant; Clear; 2.8Oz Squeeze Tube

Description: SEALS OUT WATER, AIR AND MOISTURE: Gorilla Waterproof Caulk & Seal 100% Silicone Sealant* seals out water, air and moisture and is great for kitchen, bath, window, doors, auto, marine, plumbing, gutters and more! *as cured30 MINUTE WATER READY: Can be exposed to water in as little as 30 minutes based on a 3/16” bead at 70°F (21°C) and 50% humidity. Otherwise, wait 24 hrs.MOLD & MILDEW RESISTANT: This long lasting sealant is not only mold & mildew resistant, but won't yellow, shrink or crack over time!INDOOR/OUTDOOR: All WeatherUSE ON: Stainless Steel, Fixtures, Countertops, Laminate, Porcelain, Sink, Shower, Tub/Tile, Granite, Ceramic, Gaps & Cracks, Painted Surfaces, Wood, Vinyl, Metal, Aluminum, Trim/Siding, Cables, Glass, Drywall, Stone, Marble, Gutters, Plumbing, And more! Gorilla Waterproof Caulk & Seal 100% Silicone Sealant* seals out water, air and moisture and is great for kitchen, bath, window, doors, auto, marine plumbing, gutters and more! Ready for water exposure in just 30 minutes, this long lasting sealant is not only mold & mildew resistant, but won't yellow, shrink or crack over time! *as cured DIRECTIONS: All surfaces should be clean and free of dirt, grease, oil and old sealant. Best if used above 40°F. 1) Unscrew cap, fold and screw-on nozzle. Cut to desired bead size. 2) Apply sealant, pushing bead ahead of nozzle. 3) Smooth bead immediately after application, before a skin forms. STORAGE: Replace cap tightly to prevent material from curing. Store in a cool, dry location. To re-use nozzle, remove sealant from nozzle once cured. STORE AWAY FROM CHILDREN AND ANIMALS. CLEAN-UP: Wipe off wet sealant immediately with a dry cloth. Isopropyl alcohol may be used according to solvent manufacturer’s instructions. Service Temp: -40°F to 350°F (-40°C to 176°C) †NOTE: Do not use on wet, damp, frozen or contaminated surfaces. Not paintable. Not for use in underwater applications, aquariums, on brick, masonry, cementitious materials or on metals sensitive to corrosion including brass and galvanized metals. For general auto/marine applications only. Not for under hood or direct gasoline exposure. For gaps larger than ½” use backer rod. Can be exposed to water in as little as 30 minutes based on 3/16" bead at 70°F and 50% humidity. Otherwise, wait 24 hrs.

Price: 22.43 USD

Location: West Palm Beach, Florida

End Time: 2024-09-06T16:45:21.000Z

Shipping Cost: 0 USD