Description: High-Precision GNSS TIMING GPS Module HAT Kit for Raspberry Pi 3 Model B Plus 4PACKAGE CONTENT: ( NOT include Raspberry Pi board and Button Battery.)NEO-M8T GNSS TIMING HAT x1 GPS External Antenna (B) x1 USB Cable x1 RPi screws pack x1 2x20PIN female header x1 WIKI English manual : www.waveshare.com/wiki/NEO-M8T_GNSS_TIMING_HAT GNSS Module Based On NEO-M8T For Raspberry Pi, Single-Satellite Timing Feature Accurate & Fast Positioning With Minor Drifting, Low Power Consumption, Outstanding Ability For Anti-Spoofing & Anti-Jamming This is a Raspberry Pi GNSS HAT based on NEO-M8T with multi-constellation receiver support, as well as precise single-satellite timing feature. It supports concurrent reception of up to 3 GNSS (GPS, Beidou, Galileo, GLONASS) and augment systems like SBAS, QZSS, IMES, and D-GPS. It features accurate & fast positioning with minor drifting, low power consumption, outstanding ability for anti-spoofing & anti-jamming, and so on.By simply attaching it onto the Pi, it is fairly easy to enable GNSS capability for your Raspberry Pi. Features At A GlancePrecise timing feature, high availability even with one single satelliteHigh dynamic range radios with both analog and digital interference mitigation, supporting applications in wireless communications equipmentMulti-constellation receiver support, concurrent reception of up to 3 types of GNSS satellite systems from GPS, Beidou, Galileo, and GLONASS, and still retains low power consumptionAugment systems support, including SBAS, QZSS, IMES, D-GPS, improving the positioning performance of service locationA-GNSS (Assisted GNSS) support, reducing the first positioning time when powered up, improving the acquisition sensitivityFeatures -167dBm navigating sensitivity and outstanding ability for anti-spoofing & anti-jamming, supports geo-fencingSupports U-Center, an easy way to config the moduleStandard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson NanoBreakouts the module's UART and I2C interface, for connecting with host boards like Arduino/STM32Baudrate range: 4800~921600bps (9600bps by default)Supports DDC (I2C compliant) interface: up to 400KHz (max)Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts4x LEDs for indicating the module operating statusComes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32) Specifications GNSS SPECIFICATIONS NEO-M8TGPS & GLONASSGPSGLONASSBeiDouGalileo Frequency band 72-channel u-blox M8 engineGPS L1C/A, SBAS L1C/A, QZSS L1C/A, QZSS L1 SAIF, GLONASS L1OF, BeiDou B1, Galileo E1B/C Horizontal positioning accuracy Autonomous 2.5m CEP 2.5m CEP 4.0m CEP 3.0m CEP - SBAS 2.0m CEP 2.0m CEP - - - Max navigation update rate 4Hz 10Hz 10Hz 10Hz 10Hz Time-To-First-Fix Cold starts 25s 29s 30s 34s 45s Hot starts 1s 1s 1s 1s 1s Aided starts 2s 2s 2s 3s 7s Sensitivity Tracking and navigating -167 dBm -166 dBm -166 dBm -159 dBm -159 dBm Aided acquisition -157 dBm -157 dBm -151 dBm -146 dBm -142 dBm Re-acquisition -160 dBm -160 dBm -156 dBm -156 dBm -153 dBm Cold starts -148 dBm -148 dBm -145 dBm -143 dBm -138 dBm Hot starts -160 dBm -160 dBm -156 dBm -155 dBm -151 dBm Velocity accuracy 0.05 m/s 0.05 m/s 0.1 m/s 0.1 m/s 0.1 m/s Heading accuracy 0.3 degree 0.3 degree 0.4 degree 0.5 degree 0.5 degree PPS accuracy Clear sky ≤20ns Indoor ≤500ns Jitter ±11ns PPS frequency 0.25Hz…10MHz (configurable) Operational limits Acceleration (max): 4g Altitude (max): 50000m Velocity (max): 500m/s OTHER SPECIFICATIONS Communication interface USB, UART (4800~921600bps, 9600bps by default), I2C (max 400KHz) Update rate 1Hz (default), 10Hz (max) Protocol NMEA 0183 Version 4.0 (V2.3 or V4.1 selectable), UBX, RTCM 2.3 Power supply 5V Overall current <45mA@5V (Continue mode) Module current 32mA@3V (Continue mode) Operating temperature -40℃ ~ 85℃ Dimensions 65mm × 30.5mm Standard Raspberry Pi 40PIN GPIO Compatible With Raspberry Pi Series Boards, Jetson Nano Single-Satellite Timing & Synchronization High Integrity, Precise Timing Feature, High Availability Even With One Single Satellite Cost Effective, High Precision, Easy Implement Multi-Constellation Receiver Support Concurrent Reception Of Up To 3 Types Of GNSS Satellite Systems, And Still Retains Low Power Consumption Supports GPS, Beidou, Galileo, And GLONASS Augment Systems Support Augment System Is Aimed At Improving The Accuracy, Integrity, Reliability, And Availability Of Positioning And Navigation Supports Augment Systems Including SBAS, QZSS, IMES, D-GPS Geo-Fencing Support Features -167dBm Navigating Sensitivity, Outstanding Ability For Anti-Spoofing & Anti-Jamming Software U-Center Support An Easy Way To Config The Module Applications Ideal For Fleet Management, Asset Tracking, Financial Transaction, Smart Electricity Grids, Security Systems, Industrial PDA, GIS App, Etc. What's On Board NEO-M8T moduleRT9193-33 power chipTXS0108EPWR voltage translatorStatus indicatorsRXD/TXD: UART TX/RX indicatorPPS: GPS status indicatorPWR: power indicatorBattery holdersupports ML1220 rechargeable cell, for preserving ephemeris information and hot startsRaspberry Pi GPIO headerfor connecting with Raspberry PiUSB portUART, I2C interfacefor connecting with other MCUsGNSS antenna connectorAbout delivery TimeDelivery detailsAbout after-sales policyAbout delivery TimeIt takes 12-20 working days to arrive most European countries using standard shipping.Some European island countries, overseas territories and South American countries need to arrive in 25-35 working days. For urgent parcel, you can email us and choose Fedex, DHL, UPS, EMS etc., but you need to pay extra fee.Delivery detailsIf you need to use the express delivery service, please contact me via eBay mail.About after-sales policyWe absolutely stand behind our products. All of our items will be checked and tested before shipment to ensure 100% performance. We also offer 15 day money back guarantee if you are unsatisfied for any reason whatsoever. We will refund the entire cost of the item not including the shipping and insurance charges. Our aim is 100% customer satisfaction! If you are unclear about product usage, please feel free to contact us. We will offer your detailed instructions for use.
Price: 107 USD
Location: Shen Zhen
End Time: 2024-08-10T09:30:57.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Waveshare
Type: NEO-M8T GNSS TIMING HAT
Country/Region of Manufacture: China
Model: RPI Raspberry Pi Zero 2 W Expansion Board
MPN: Pi zero 2W shield project set, Pi 4b Extension Expansion Board, pi3 2gb 4gb 8gb ram Accessories kit, zero w wh 2w breakout shield, pi4b Extender extender starter kit, Jetson Nano b01 electronic set, Raspi 5 pi5 32gb 16gb lcd
